This man-vs.-machine contest may have fallen short of the status of a contemporary John Henry tale, but it nevertheless teaches a lesson about inexorable technological progress.
Measure, an aerial intelligence company, wanted to know how well its drone could conduct a solar plant’s routine inspection compared to a ground-based crew. Measure found that the inspection results were 99% identical. So, a tie.
But the drone took two hours to complete the inspection compared to two days for ground-based crews.
Drone wins.
“Drones can also capture tower, pole, and turbine images from most any angle, which is often not possible with other inspection methods,” Measure said in a recent white paper. “In solar applications, drones spot sub-module defects that manual inspections typically miss.”
The AES Corp. (NYSE: AES), a global utility with operations in 15 countries, is an enthusiastic user of the technology.
On the AES website, Gary Fearis, lead drone pilot for the company’s Dayton Power & Light unit, described an early assignment at a Savannah, Ga., solar farm.
“We actually flew several sections of the farm and found multiple panels that were not working,” he said. “And the way you find that they were not working is that they’re hotter than the panels around them that are working.”
Measure admited that the method is imperfect.
“Thermal imagery cannot report on the reason for a hot spot on a panel,” the white paper said, referring to solar inspections. “From time to time, a maintenance person may go out to inspect a defective panel only to find that the hot spot was nothing more than a leaf, bird dropping, or some other element of nature.”
In the area of wind turbine inspections, a manual inspection beats the data collected by a drone, especially considering that the collection is dependent on the skill of the pilot in this relatively new area, Measure said. That manual inspection, however, is time-consuming and hazardous and, even when providing superior results, still may not best the drone in terms of cost-effectiveness.
Drone inspections for solar facilities, Measure said, are 95% more efficient and identify defects, tracker misalignment, shading, tower and substation conditions that manual inspections might miss. The efficiency stems from data that is sent to a smart phone app, which allows site and update inspection results directly from the field.
Drone are able to identify wind turbine blade defects faster than manned inspections. Ground-based inspections, Measure said, miss 15% to 20% of the defects caught by drones.
Joseph Markman can be reached at jmarkman@hartenergy.com and @JHMarkman.
Recommended Reading
Analysts: Diamondback-Endeavor Deal Creates New Permian Super Independent
2024-02-12 - The tie-up between Diamondback Energy and Endeavor Energy—two of the Permian’s top oil producers—is expected to create a new “super-independent” E&P with a market value north of $50 billion.
Diamondback Energy to Acquire Permian’s Endeavor for $26B
2024-02-11 - Diamondback Energy will acquire Endeavor Energy in a cash-and-stock agreement that will create a Permian juggernaut with a combined value of more than $52 billion in a merger of near equals.
Is Double Eagle IV the Most Coveted PE-backed Permian E&P Left?
2024-04-22 - Double Eagle IV is quietly adding leases and drilling new oil wells in core parts of the Midland Basin. After a historic run of corporate consolidation, is it the most attractive private equity-backed E&P still standing in the Permian Basin?
Williston Warriors: Enerplus’ Long Bakken Run Ends in $4B Chord Deal
2024-02-22 - Chord Energy and Enerplus are combining to create an $11 billion Williston Basin operator. The deal ends a long run in the Bakken for Enerplus, which bet on the emerging horizontal shale play in Montana nearly two decades ago.
Sold in 66 Days: Inside the Diamondback-Endeavor Deal
2024-03-26 - Diamondback Chairman and CEO Travis Stice first offered “at least $25 billion” for Endeavor Energy Resources on Dec. 8. The deal closed just weeks later for $26 billion.